← How to fuse ordinary hydrogen
✨ CNO pulse stages
The pulse stages
The reactor uses inertial confinement. Fuel arrives in a converging flow; its inward momentum briefly holds the mixture at high density and temperature. The products then expand toward the first wall. Four mixtures perform different parts of the cycle, with material sorting and radioactive decay between pulses.
The bulk recipes contain more hydrogen than some individual reactions consume. The table gives the approximate initial catalyst-to-hydrogen mass ratios, based on nuclear mass numbers; the equations show the actual nuclear reactions. Unburned hydrogen is collected and returned. The feeds are isotope-selected ammonia and hydrazine for the nitrogen stages and CH₂ polymer for both carbon stages.
The endpoint percentages below are per starting catalyst nucleus, after the short-lived pulse products have decayed. Q is deposited hot-burn nuclear energy divided by the energy supplied to the precursor; delayed decay heat is counted separately in the plant. GK means a billion kelvin.
Scroll the table horizontally to see the outcomes.
| Stage and main reaction | Bulk mix and pulse | Products after decay |
|---|---|---|
| Carbon-12 pulse12C + 2p → 14O; later decay to 14N | 6:1 catalyst:H 1.131 × 1013 kg Input 4.074 × 1025 J |
76.65% becomes 14N; 7.66% becomes 13C and 15.69% remains 12C. Q = 9.92; peak 1.622 GK. |
| Carbon-13 pulse13C + p → 14N; some captures proceed to 15O | 13:2 catalyst:H 1.131 × 1013 kg Input 3.328 × 1025 J |
47.85% becomes 14N; 45.49% becomes 15N and 6.66% remains 13C. Q = 22.66; peak 1.666 GK. |
| Nitrogen-14 pulse14N + p → 15O; later decay to 15N | 14:3 catalyst:H 1.131 × 1013 kg Input 3.493 × 1025 J |
80.28% becomes 15N; 19.72% remains 14N. Q = 10.76; peak 1.216 GK. |
| Nitrogen-15 pulse15N + p → 12C + 4He | 15:2 catalyst:H 1.131 × 1013 kg Input 3.196 × 1025 J |
77.45% becomes 12C; 22.51% remains 15N. Q = 7.73; peak 0.513 GK. |
Between pulses, 15O and 14O decay to nitrogen, and some 13N decays to 13C. Their half-lives are about 122.3 seconds, 70.6 seconds and 9.96 minutes. Material can be stored in parallel batches while it decays.
Modeling information
The pulse calculations follow a spherically symmetric fuel mixture in 128 radial zones and use a 27-isotope reaction network. They start with prepared, converging fuel; the merger of the incoming pellets still needs to be modeled. Plasma simulation shows pulse histories, numerical checks, code and raw data. The pulse and isotope data give the selected results; the design repository contains the supporting calculations and research.
See the sources and calculations for the full article.