Skim
✨From tkwa.me
Skim is a personal-flight augmentation released by Pelagic Somatics in 2039. It lets a person take off vertically, hover and fly prone inside a reconfigurable protective shell. Transparent petals spread around the body for hovering, then retract as forward-flight machinery takes over. At slower speeds the user can extend their arms through fitted openings while a clear canopy protects their face. Skim Pro offers a more luxurious flight experience.[1][7]
Over authorized ocean routes, Skim reaches Mach 4.8 inside an extended lifting shell. Its low-power cruise configuration operates at about 43 kilometres altitude and uses about 458 kW of fuel power for a 100 kg combined mass. The matter reservoir carries fuel and construction stock, then stows inside the flight structure. The 2039 personal aviation settlement established its operating rules, incorporating the light-sport aircraft regime over land and separate authorizations for high-speed ocean flight.[1][3]

Development and use#
Pelagic developed Skim for customers who retained biological bodies after the 2029 superduperintelligence merger. Skim extended Pelagic's work on bodily augmentations and the shared reservoir into aviation. Span, the company's 2037 flagship, already maintained circulation and structural support while extending a living arm to five metres. Skim required equipment that could carry the whole wearer, manage propulsion and change its shape through takeoff, cruise and landing. Atomically precise manufacturing supplied the deployable structures and integrated machinery.[1]
Somatic clinics fit the augmentation and establish the interfaces through which the wearer and flight equipment work together. Pelvic and torso mounts distribute loads. Before departure, the reservoir supplies the flight hardware and reserves material for the structures needed later in the journey. The user's current anatomy determines the fit: a larger Trim body transformation also changes the shape and loads the flight system must accommodate.[1][2]
Owners use Skim for excursions, coastal travel and the experience of moving through open air under their own control. The Borough's 2039 account described the pleasure of an aerial view alongside the practical work of becoming a pilot. Flight can form one part of an outing: the Earth tunnel network provides long approaches to places from which owners continue by air. Pelagic subsequently incorporated flight into the broader reservoir platform that developed during the early 2040s.[4][5]
Flight system#
For takeoff and landing, transparent petals deploy roughly three to four metres across. Open electroaerodynamic channels accelerate ions, which transfer momentum to the surrounding air and drive it downward. The supporting ribs carry the reaction loads through the petal roots into the torso and pelvis. Adjusting thrust across the petals controls the wearer's attitude. The broad downward flow produces a substantial breeze around the landing area.[1][2]
Forward-facing air-breathing turbines accelerate the prone flyer. Aerodynamic lift and vectored thrust progressively take the load, allowing the petals to retract or return their material to the reservoir. Landing reverses that sequence: the petals deploy and regain support before the forward airflow becomes too weak to carry the wearer. The same supports, canopy and stored inventory remain part of the system through each change.[1][2]
During subsonic flight, a continuous transparent canopy encloses the whole head with room inside it. The outer shell bridges the shoulders, waist and hips into a smooth aerodynamic shape. Fitted side openings allow arms-out flight at lower speeds. As speed rises, the wearer brings their arms inside and the openings close. The carrier's legs and neck fold away, and a faired storage volume near the combined centre of mass retains fuel and unused feedstock. A Shed-derived water-repellent coating clears rain and spray from the canopy during slower flight.[1]
The reservoir keeps construction material and propulsion fuel in separate allocations. Reclaimed petal material can form other parts of the flight shell; fuel is consumed as the engines take in air and discharge exhaust. Additional structure, remaining fuel and retained machinery all contribute to the carried mass. Pelagic's partner reference describes this material cycle and the associated airflow and thermal requirements.[1][2]

Ocean flight#
High-speed operation takes place in authorized ocean flight corridors. Turbines accelerate the wearer before ramjets take over. Ramjets use the incoming high-speed air to compress their flow. The sealed pressure shell encloses the body, folded carrier and remaining reservoir. Longer nose and tail fairings and swept lifting surfaces deploy for cruise, bringing the outer envelope to five metres long and two metres across.[1][3]
At Mach 4.8 and 43 kilometres altitude, the flyer travels about 1.55 kilometres per second. The shell carries the wearer's weight aerodynamically while the ramjets replace the energy lost to drag. Flush windows preserve a view through the pressure enclosure. Refractory surfaces, insulation and fuel cooling manage external heating; separate cabin cooling protects the occupant.[1][6]
The climb and acceleration use additional fuel before the low-power cruise segment begins. At the cruise reference mass, the flyer carries about 120 MJ of kinetic energy and has gained roughly 42 MJ of gravitational energy. Ocean routes reserve room for that acceleration, large-radius turns, braking and the approach to land. A level turn at thirty degrees of bank has a radius of about 430 kilometres. The geographic governor starts deceleration far offshore, keeping the sonic-boom footprint clear of the coast and restoring permitted land-flight conditions before arrival.[1][3]

Engineering#
Skim's cruise configuration combines a slender pressure cabin, a broad swept lifting surface and two integrated ramjet ducts. Pelagic's flight manual gives a reference case with a 65 kg occupant, 28 kg of retained hardware and 7 kg of remaining fuel. The hardware allocation includes the shell, thermal protection, hover apparatus, engines, folded carrier and cabin equipment. The resulting 100 kg mass describes the beginning of the sized cruise segment; departure fuel is budgeted separately. Fenwick Research's technical appraisal treated surface condition, inlet performance and carried mass as the principal constraints on the low-power mode.[1][6]
Airframe and drag#
The five-metre shell spreads its enclosed volume along a long taper. The occupant lies in the thicker central portion, with fuel and retained machinery arranged around the torso and hips. The swept surfaces provide about five square metres of planform area. At 43 km, air pressure is about 193 Pa and dynamic pressure is about 3.12 kPa. An angle of attack around four degrees produces approximately 930 N of lift. Following Earth's curvature supplies the remaining inward acceleration needed for the flight path.[1]
A smooth, flush exterior reduces skin friction. Microscopic blind pores in selected surface layers absorb the high-frequency pressure disturbances that can grow into turbulence. The cruise surface keeps approximately the forward three quarters of its flow length laminar, with the aft portion treated as turbulent in the power budget. The inlet lips and control surfaces sit where their disturbances can be managed. Surface sensors check the flow state, and the governor leaves the low-power mode when contamination, damage or changing flight conditions move it outside its operating envelope.[1][6]
The drag allocation is about 51 N for skin friction, 27 N for the pressure waves caused by the shell's volume, 75 N for generating lift and 15 N for installation and trim. A ten-percent allowance brings the total to about 185 N, giving a lift-to-drag ratio of five. Climbing further reduces surface drag but increases the angle and pressure forces needed to support the wearer. The selected altitude balances those effects.[1][6]
Propulsion and power#
The two ramjets together capture about 0.42 kg of air per second through a combined freestream capture area of 0.105 square metres. Forebody compression surfaces and adjustable inlet lips produce a sequence of weak shocks before a final shock slows the flow for subsonic combustion. The inlet retains about 75% of the incoming total pressure. The air reaches the burner at a total temperature near 1,350 K, and lean hydrocarbon combustion raises it to about 2,100 K. The turbine machinery used earlier in the flight is isolated behind closed, faired passages.[1]
Expansion through the nozzles gives an exhaust speed near 1,940 m/s. Gross exhaust thrust is about 838 N. Taking in air that is already moving past the flyer costs about 653 N of inlet momentum, leaving 185 N of net thrust. At 1,549 m/s, that thrust supplies about 286 kW of useful power. The cycle converts approximately 63% of the fuel's lower heating value into net thrust power at the reference point.[1][6]
The ramjets consume about 453 kW of fuel power. A separate converter consumes another 5 kW to supply 3 kW of electricity for cabin cooling, pumps, sensors and control. Total cruise input is therefore about 458 kW, corresponding to roughly 0.64 kg of hydrocarbon fuel per minute at 43 MJ/kg. Fuel flow and atmospheric oxygen sustain the steady flight; the reservoir keeps the remaining construction stock available for the landing configuration.[1][2]
The operating margin depends on preserving the specified mass and flow conditions. With the same geometry, a fully turbulent exterior would require about 563 kW; increasing combined mass to 120 kg would require about 546 kW. The flight controller checks these loads before entering the mode. Climb, acceleration and departures from the reference cruise condition have their own power settings and fuel reserves.[1][6]
| Quantity | Value |
|---|---|
| Combined mass | 100 kg, including occupant and remaining fuel |
| Shell dimensions | 5 m long; 2 m span; 5 m² lifting planform |
| Speed | 1,549 m/s |
| Lift / allocated drag | 930 N / 185 N |
| Useful thrust power | 286 kW |
| Ramjet fuel input | 453 kW |
| Auxiliary fuel input | 5 kW, producing 3 kW electricity |
| Total fuel input | 458 kW |
| Fuel consumption | 0.64 kg/min |
| Margin below 500 kW | 42 kW |
Heat and life support#
The shell separates a hot exterior from a pressure cabin maintained near 75 kPa. Most of the opaque exterior loses aerodynamic heat by radiation. The stagnation temperature of the captured air is about 1,350 K; local surface temperatures follow the balance between airflow heating, radiation and conduction. High-emissivity ceramic surfaces handle the broad exposed areas. Nose and inlet edges have concentrated heat loads and embedded fuel passages.[1]
Fuel first collects heat from the cabin loop and machinery, then passes through hotter channels before reaching the burners. Heating and controlled catalytic cracking absorb about 2 MJ per kilogram of usable fuel heat sink. At the reference flow, this supplies roughly 21 kW of cooling capacity against an allocated load of about 14 kW. The hot fuel products then burn in the ramjets. The large radiating surface carries the rest of the exterior's thermal load.[1][6]
Insulation and thermally isolated supports limit heat reaching the occupant. Transparent areas use separated hot and cold panes with coatings that reduce radiative transfer. The cabin's reference cooling load is about 0.7 kW, including the wearer and internal equipment; the heat pump uses about 1 kW of electricity and rejects its heat to the fuel circuit. This flight cooling system operates alongside the smaller comfort functions of Temper. Stored breathing gas, carbon-dioxide removal and moisture control maintain the sealed cabin through the fast leg. With Cairn and Rill installed, the cabin controller includes their waste-processing load in the wearer's oxygen, carbon-dioxide and heat budgets.[1][2]
Descent and braking dispose of the stored flight energy through aerodynamic drag and controlled heat rejection. As speed falls, the long cruise fairings return to storage and the shorter canopy configuration takes over. The turbines resume forward-flight duty, and the hover petals deploy before aerodynamic lift becomes insufficient. Fuel, recoverable structure and unrecovered exhaust remain separately accounted for throughout the sequence.[1][2]
Aviation requirements#
The 2039 settlement incorporated the light-sport aircraft regime in force in 2026 into overland operation. Its requirements cover pilot qualifications and medical eligibility, registration and airworthiness, equipment, maintenance and inspections, operating limitations, airspace access, air-traffic instructions, right of way, weather, speed and altitude. The flyer carries a pilot certificate and the body's aircraft documents. Ocean-mode operation has its own authorization and qualification requirements.[3]
The rules preserve the distinction between the aircraft's eligibility and the pilot's privileges. Someone exercising sport-pilot privileges must meet the corresponding limitations and endorsement requirements; other qualifications carry their applicable privileges. The inherited 2026 regime expanded the aircraft sport pilots could operate and allowed night privileges with the required training, endorsements and medical qualification.[3]
The aircraft requires a condition inspection every twelve calendar months by an appropriately qualified aviation inspector, alongside its applicable maintenance and operating requirements. Pelagic clinics offered combined medical and aviation appointments. As The Borough observed, a healthy customer could leave an appointment medically fit and legally unairworthy.[3][4]
Residents' associations, flight schools and inspection businesses supported the settlement. The land requirements gave each a familiar role in the new activity, while separately authorized ocean corridors accommodated the augmentation's fast operating mode. Owners planned departures and arrivals around those rules, local airspace and the performance available for the journey.[3][4]
See also#
- Pelagic Somatics
- Matter reservoir
- Span
- Atomically precise manufacturing
- Ocean flight corridor
- Personal aviation settlement
References#
- ↑ a ↑ b ↑ c ↑ d ↑ e ↑ f ↑ g ↑ h ↑ i ↑ j ↑ k ↑ l ↑ m ↑ n ↑ o ↑ p ↑ q ↑ r ↑ s ↑ t ↑ u ↑ v ↑ w ↑ x ↑ y ↑ z ↑ { ↑ | ↑ } ↑ ~ Pelagic Somatics (2039). Skim® flight and thermal-protection manual.
- ↑ a ↑ b ↑ c ↑ d ↑ e ↑ f ↑ g ↑ h Pelagic Somatics (2039). Reservoir material and thermal reference for clothing and equipment partners.
- ↑ a ↑ b ↑ c ↑ d ↑ e ↑ f ↑ g ↑ h Civil Aviation Settlement Register (2039). Personal flight augmentations: land-flight obligations and ocean-corridor authorizations.
- ↑ a ↑ b ↑ c The Borough (2039). “Fit to live, grounded to fly.”
- ↑ Fenwick Research (2044). From somatics to a platform: Pelagic and General Affordances, 2035–2043.
- ↑ a ↑ b ↑ c ↑ d ↑ e ↑ f ↑ g ↑ h Fenwick Research (2040). Skim: cruise power, surface condition and the cost of carrying a pilot.
- ↑ Pelagic Somatics. Skim Pro: customer guide.